The installation of color steel tile has brought the guarantee of use to the building. The product is firm and beautiful to use, but most people do not know much about its chamfering process. It is mainly used to make its edges and corners neat, so that when you use it, you will find it more uniform. Next, let's learn about the chamfering process of Jinan color steel tile, and interested friends can pay attention to it.
The portable sandwich panel saves a lot of installation time because it is relatively solid and does not affect the strength of the building. At the same time, its fire performance increases the guarantee for the building. It is neatly cut at the edges and corners. In later construction, especially in alignment, it will be very light.
What is the processing method of color steel tile corner cutting?
1. Multi piece diagonal cutting.
The multi piece line is arranged at a 45 degree angle. The processing efficiency of color steel tile chamfering by this method is obviously multiple times that of single piece chamfering
2. Cut two pieces symmetrically.
Using this method, a pair of backup plates with an included angle of 90 degrees should be made in advance. The line to be chamfered faces the end face 90 degrees along the end faces on both sides of the backup plate. After aligning the knives, cut off the corner cutting part of the sandwich panel, and two mutually symmetrical corner cutting lines can be cut at a time. This method is only applicable to symmetrical chamfer lines. If the workbench allows, 4 or 8 lines can be cut at the same time.
3. Chamfer under special circumstances.
The lines shall be cut to a 45 degree angle. When the height and bottom size of color steel tile are so large that the blade cannot cut, the cutting angle shall be changed. The new angle cutting method is to place the line horizontally, rotate the workbench to a certain angle, rotate the blade to a certain angle, adjust the position relationship between the blade and the line, and then cut the angle.
It can be seen that the corner cutting process of color steel tile is well done, and the product will be relatively stable in later use. However, how to deal with the edges and corners after cutting is the standard for us to judge the quality of the manufacturer's products. Therefore, we need to pay attention to the cracks during construction, otherwise the overall effect of later use will be affected. If there is anything you don't understand, please feel free to consult us http://www.jnhxtcg.com Come on!