There will be some problems in the use of Jinan floor bearing plates. Let's introduce them specifically:
1. What is the floor bearing plate and the material used?
Floor bearing plate is used to replace the original formwork in high-rise buildings. The material of floor bearing plate refers to the zinc content and yield strength. Common floor bearing plates are Q235, Q345 and G410.
2. What are the advantages of floor bearing plate over civil engineering?
Compared with civil engineering, the key advantages of floor bearing plate are fast construction, labor saving, soil mixing saving, good efficiency, no need for care, direct use as permanent formwork, and durability. (Because the floor bearing plate can be constructed in multiple layers) It has strong anti inflammation function, good anti-seismic function and can be changed back and defrauded again.
3. What are the key features of floor bearing plates?
Light weight, high strength, large bearing capacity, good seismic resistance, simple and fast construction, simple assembly, replacement of traditional formwork, improvement of traditional formwork shortcomings, can be used as a part of structural strength, reduce raw material costs, easy reinforcement, wiring, piping construction, neat and elegant appearance.
4. How about floor bearing plate without reinforcement?
All need reinforcement, but the quantity is large and small. It is better to study the steel bar truss floor support plate, which is convenient for comparison. Moreover, it is better to design the non maintained slab span with a relatively long span, which may be reduced without temporary maintenance.
5. What is the type of floor bearing plate?
Floor bearing plate is divided into open type, closed type and steel truss plate.
6. What is the wave height of the floor support plate? What is the wave distance of floor bearing plate?
Basic parameters of YX73-140-760 type floor bearing plate Wave height: 73mm Wave distance: 140mm Useful width: 760mm Opening width: 1000mm (thickness specification: 0.8mm, 1.0mm, 1.2mm)
7. Thickness of floor bearing plate?
The conventional thickness is 0.8mm-1.2mm. The thickness of the bottom plate of the steel bar truss floor support plate is usually 0.5mm.
The above are common problems in the use of floor bearing plates. I hope this article can help you. More related material questions come to our website http://www.jnhxtcg.com Consult!